In this detailed tutorial, Markus from 2onelab guides you through the essential steps to safely and efficiently prepare your 2Create 3D metal printer for printing. Whether you’re new to metal 3D printing or an experienced user, this step-by-step walkthrough will ensure you get started smoothly.
Watch the full tutorial video to see all these steps in action and get your 2Create printer ready for your next metal print job!
Sie sehen gerade einen Platzhalterinhalt von YouTube. Um auf den eigentlichen Inhalt zuzugreifen, klicken Sie auf die Schaltfläche unten. Bitte beachten Sie, dass dabei Daten an Drittanbieter weitergegeben werden.
Mehr Informationen5 Steps to Prepare Your 2Create
1. Wear safety equipment:
- Put on your mask and gloves before handling any materials.
2. Fill the powder reservoir:
- Carefully add the metal powder needed for your print job.
3. Install the build platform:
- Place the build platform inside the machine, insert the clamping pin, and tighten it securely.
4. Apply the first powder layer:
- Raise the powder reservoir and spread the initial coating layer evenly.
5. Seal and prepare the printing environment:
- Close the printer door, fill the chamber with inert argon gas (especially important for titanium printing), load your print’s G-code, and start the printing process.
By following these five essential steps, you’ll ensure a safe setup and optimal conditions for high-quality metal prints with your 2Create printer.
Advanced Metal 3D Printers
Choose 2onelab – with the 2Create/2Create Plus and 2Create Desktop metal 3D printers for dental, medical, industrial, and R&D use.
Boost quality, cut costs, and work faster – powered by cutting-edge tech and real-world expertise.
