The following steps outline how to prepare the 2Create Metal 3D Printer for a powder change from non-reactive to reactive materials. For a detailed demonstration of the process, feel free to check out our video tutorial.
Sie sehen gerade einen Platzhalterinhalt von YouTube. Um auf den eigentlichen Inhalt zuzugreifen, klicken Sie auf die Schaltfläche unten. Bitte beachten Sie, dass dabei Daten an Drittanbieter weitergegeben werden.
Mehr InformationenSteps for Powder Change
1. Remove Non-Reactive Powder:
- Turn off the machine. Empty the reservoir, clear the build platform, and drain the overflow. Move the pistons up/down and use a vacuum to remove remaining powder.
2. Pipe Cleaning:
- Follow the separate video tutorial.
3. Clean the Chamber:
- Wipe down the chamber with a rag and cleaning alcohol.
4. Change Filters:
Replace the exhaust, pre-, and main filters:
- Open the door, release clasps, unscrew screws, remove grounding cables.
- Pull out and replace filters.
5. Reassemble the Machine:
- Ensure the main filter’s rubber side faces the machine. Reattach screws and close the door.
Following these steps ensures your 2Create printer is safely prepared for reactive materials, reducing contamination risk and supporting consistent, high-quality prints.
Advanced Metal 3D Printers
Choose 2onelab – with the 2Create/2Create Plus and 2Create Desktop metal 3D printers for dental, medical, industrial, and R&D use.
Boost quality, cut costs, and work faster – powered by cutting-edge tech and real-world expertise.
