This tutorial covers the pipe cleaning process for the 2Create Metal 3D Printer, typically performed when switching from reactive to non-reactive materials or changing filters. For a detailed demonstration, please refer to the video tutorial.
1. Purpose:
- Pipe cleaning clears any remaining powder in the pipes by activating the extraction motor at full capacity, directing the powder to the filters.
2. Preparation:
Before cleaning, remove all residual powder.
- Clear the building platform, reservoir, and working area.
- Move both axes up and down, then vacuum the shaft to remove any remaining powder.
3. Activate Inert Gas:
- Close the door and activate the inert gas system. Optionally, use fast gas filling until the oxygen level is below 2% to prepare the filter system.
4. Start Pipe Cleaning:
- In the settings menu, select the “Pipe Cleaning” option. The process will take around 10 minutes.
5. Completion:
- Once finished, the “Pipe Cleaning” option will disappear from the settings menu, indicating the procedure is complete.
Advanced Metal 3D Printers
Choose 2onelab – with the 2Create and 2Create Plus metal 3D printers for dental, medical, industrial, and R&D use.
Boost quality, cut costs, and work faster – powered by cutting-edge tech and real-world expertise.
