The following steps outline how to prepare the 2Create Metal 3D Printer for a powder change from non-reactive to reactive materials. For a detailed demonstration of the process, feel free to check out our video tutorial.
Play Video about How to Prepare the 2Create for Powder Change
1. Remove Non-Reactive Powder:
- Turn off the machine. Empty the reservoir, clear the build platform, and drain the overflow. Move the pistons up/down and use a vacuum to remove remaining powder.
2. Pipe Cleaning:
- Follow the separate video tutorial.
3. Clean the Chamber:
- Wipe down the chamber with a rag and cleaning alcohol.
4. Change Filters:
Replace the exhaust, pre-, and main filters:
- Open the door, release clasps, unscrew screws, remove grounding cables.
- Pull out and replace filters.
5. Reassemble the Machine:
- Ensure the main filter’s rubber side faces the machine. Reattach screws and close the door.
