Find out in our tutorial, how to quickly, safely, and professionally replace the pre- and main filters in your 2Create Metal 3D printer. For a detailed demonstration of the process, please refer to our video tutorial below.
Step-by-Step Instructions
1. Preparation:
- Ensure the machine is powered off.
- Wear the necessary protective equipment for safety.
2. Remove the Old Filters:
- Open the door.
- Release the two clasps.
- Unscrew the two screws.
- Disconnect the grounding cables.
- Carefully remove both filters: the pre-filter and the main filter.
3. Install the New Filters:
- Insert the new filters into place.
- Note: The main filter has two possible orientations. Ensure the rubber side faces the machine, as shown by the airflow sticker.
4. Reassemble the Machine:
- Reattach the screws and grounding cables.
- Close the door securely.
By following these steps, you’ll ensure safe and proper filter replacement, keeping your 2Create printer running efficiently and maintaining a clean printing environment.
Advanced Metal 3D Printers
Choose 2onelab – with the 2Create and 2Create Plus metal 3D printers for dental, medical, industrial, and R&D use.
Boost quality, cut costs, and work faster – powered by cutting-edge tech and real-world expertise.
