2SIEVE

The fast and safe powder recycling solution

The compact ultrasonic sieving system for applications where high powder quality is important

2Sieve: The compact ultrasonic sieving solution

Whether it is titanium, cobalt-chrome, aluminum or any alloy, the metal powder used in the additive manufacturing process must have a very narrow size distribution. For the 3D metal printing process (selective laser melting) the range of powder distribution is around 15 to 45 micrometers. The sieving ssystem 2Sieve helps you to optimize the powder quality to achieve optimal printing results.

Clean your metal powder to achieve perfect printing qualities

Clean your powder before use. Contaminants that occur in the overflow powder during the printing process are filtered out. This ensures high powder quality even with used powders and increases the quality of your components.

2Sieve ultrasonic sieving system 1

High end ultrasonic technology made by Teslonic AG

The ultrasonic sieving technology

The sieving material (powder) is dosed onto the mesh via a valve. The powder flows over the slightly inclined mesh which, excited by the ultrasonic converter, vibrates. Powder particles smaller than the mesh fall through the mesh and are collected in the container. The larger oversize particles pass over the sieve and fall into a container for the waste.

 

2Sieve: Safe, Simple Efficient

  • Compact design
  • Safe screening under protective gas (Argon or Nitrogen)
  • Collection containers fit directly into the 2CREATE 3D printer
  • Integrated HEPA filter for maximum safety

Specifications

  • 63µm Mesh
  • Sieving capacity approx. 1kg per 30min
  • Output frequency: 33-37 kHz
  • Electrical connection: 115 / 230 VAC; ~50/60 Hz

Ask for a quotation:

2Sieve ultrasonic sieving system 3
Facebook
Twitter
LinkedIn

Sign up for our newsletter